Just for the sake of completeness, that fact doesn't need to bother you:
https://easylinuxtipsproject.blogspot.c ... .html#ID16
(item 16)
Not that it matters much in this case, of course....
Just for the sake of completeness, that fact doesn't need to bother you:
You have 8812au installed. Remove that. You need 8821au: https://github.com/morrownr/8821au-20210708/tree/main8812au/5.6.4.2_35491.20191025, 5.15.0-101-generic, x86_64: installed
The USB wifi is the one that works, it is a PCI device that doesn't
Ok, I see my confusion now , but I might not be alone.
alias pci:v000010ECd0000B821sv*sd*bc*sc*i* rtw88_8821ce in kernel 6.5
They said something about graphic issues using kernel 6.5 and somehow the wifi still didn't work
Code: Select all
sudo apt install git dkms
git clone https://github.com/tomaspinho/rtl8821ce.git
cd rtl8821ce
sudo ./dkms-install.sh
I am on the Ubuntu Cinnamon installation now. It is using the 6.5.0,26 kernel JeremyB recommended, though that did not help me in Mint. I am not sure which driver was installed when I loaded 6.5 (8821au or 8821ce).
Code: Select all
Distributor ID: Ubuntu
Description: Ubuntu 23.10
Release: 23.10
Codename: mantic
##### kernel ############################
Linux 6.5.0-26-generic #26-Ubuntu SMP PREEMPT_DYNAMIC Tue Mar 5 21:19:28 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Cinnamon
##### lspci #############################
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) I219-LM [8086:15b7]
Subsystem: Fujitsu Technology Solutions Ethernet Connection (2) I219-LM [1734:121f]
Kernel driver in use: e1000e
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:b821]
Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:b821]
Kernel driver in use: rtw_8821ce
##### lsusb #############################
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 24ae:1100 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device
Bus 001 Device 002: ID 24ae:2000 Shenzhen Rapoo Technology Co., Ltd. 2.4G Wireless Device Serial
Bus 001 Device 005: ID 14cd:168a Super Top Elecom Co., Ltd MR-K013 Multicard Reader
Bus 001 Device 004: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### secure boot #######################
SecureBoot disabled
##### lsmod #############################
mac80211 1724416 2 rtw88_pci,rtw88_core
mxm_wmi 12288 1 nouveau
cfg80211 1318912 2 rtw88_core,mac80211
libarc4 12288 1 mac80211
wmi 40960 3 video,mxm_wmi,nouveau
##### interfaces ########################
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen
It's over my head, but I wonder if something like this needs to be done:
Then why are you posting in these Mint forums?Description: Ubuntu 23.10