QjackCtl - Fehlermeldung

Support-Forum für deutschsprachige Benutzer

Moderator: karlchen

Forum rules
Topics in this forum are automatically closed 6 months after creation.
Post Reply
Humboldt
Level 2
Level 2
Posts: 78
Joined: Sat Feb 23, 2019 11:32 am

QjackCtl - Fehlermeldung

Post by Humboldt »

Betriebssystem: Linux Mint 21.3 Cinnamon
Angeschlossenes Piano: Yamaha Digital Piano P-45B

Hallo,

QjackCtl habe ich installiert und folgende Einstellungen vorgenommen:
Schnittstelle: hw:Piano
Abtastrate: 48000
Frame/Periode: 1024
Perioden/Puffer: 2
MIDI-Treiber: seq

Dann habe ich alles übernommen und auf Start gedrückt. Hier bekam ich folgende Fehlermeldung:

14:46:40.377 Statistik zurückgesetzt.
14:46:40.384 ALSA-Verbindung geändert.
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
14:46:40.414 Schaubild der ALSA-Verbindungen geändert.
14:46:46.092 JACK startet...
14:46:46.092 /usr/bin/jackd -dalsa -dhw:Piano -r48000 -p1024 -n2 -Xseq
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
14:46:46.103 JACK wurde mit PID = 4616 gestartet.
no message buffer overruns
no message buffer overruns
no message buffer overruns
jackdmp 1.9.20
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2016 Grame.
Copyright 2016-2021 Filipe Coelho.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 10
self-connect-mode is "Don't restrict self connect requests"
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ... hw:Piano|hw:Piano|1024|2|48000|0|0|nomon|swmeter|-|32bit
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode
Released audio card Audio1
audio_reservation_finish
Cannot initialize driver
JackServer::Open failed with -1
Failed to open server
14:46:46.230 JACK wurde angehalten
14:46:48.234 Keine Verbindungsaufnahme als Client zum JACK-Server möglich. - Gesamtbetrieb schlug fehl. - Verbindungsaufnahme zum Server gescheitert. Bitte sehen Sie im Meldungsfenster nach weiteren Informationen.
Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock

Wie kann ich das Problem lösen?
Top
Humboldt
Level 2
Level 2
Posts: 78
Joined: Sat Feb 23, 2019 11:32 am

Re: QjackCtl - Fehlermeldung

Post by Humboldt »

Hier noch meine Systeminformationen, falls notwendig:

Code: Select all

System:
  Kernel: 5.15.0-101-generic x86_64 bits: 64 compiler: gcc v: 11.4.0 Desktop: Cinnamon 6.0.4
    tk: GTK 3.24.33 wm: muffin vt: 7 dm: LightDM 1.30.0 Distro: Linux Mint 21.3 Virginia
    base: Ubuntu 22.04 jammy
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X470-PRO v: Rev X.0x serial: <superuser required>
    UEFI: American Megatrends v: 4207 date: 12/07/2018
CPU:
  Info: 8-core model: AMD Ryzen 7 2700X bits: 64 type: MT MCP smt: enabled arch: Zen+ rev: 2
    cache: L1: 768 KiB L2: 4 MiB L3: 16 MiB
  Speed (MHz): avg: 2215 high: 4226 min/max: 2200/3700 boost: enabled cores: 1: 1936 2: 1883
    3: 1887 4: 1887 5: 1917 6: 1885 7: 1883 8: 1886 9: 1876 10: 1880 11: 4226 12: 4226 13: 1881
    14: 1970 15: 2107 16: 2120 bogomips: 118159
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Vega 10 XL/XT [Radeon RX 56/64] vendor: ASUSTeK driver: amdgpu v: kernel pcie:
    speed: 8 GT/s lanes: 16 ports: active: HDMI-A-2 off: HDMI-A-1 empty: DP-1,DP-2,DVI-D-1
    bus-ID: 0a:00.0 chip-ID: 1002:687f class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.4 driver: X: loaded: amdgpu,ati
    unloaded: fbdev,modesetting,vesa gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3") s-diag: 583mm (23")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-2 model: BenQ GL2580 serial: <filter> res: 1920x1080 hz: 60
    dpi: 90 size: 544x303mm (21.4x11.9") diag: 623mm (24.5") modes: max: 1920x1080 min: 720x400
  OpenGL: renderer: AMD Radeon RX Vega (vega10 LLVM 15.0.7 DRM 3.42 5.15.0-101-generic)
    v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
Audio:
  Device-1: AMD Vega 10 HDMI Audio [Radeon 56/64] driver: snd_hda_intel v: kernel pcie:
    speed: 8 GT/s lanes: 16 bus-ID: 0a:00.1 chip-ID: 1002:aaf8 class-ID: 0403
  Device-2: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie:
    speed: 8 GT/s lanes: 16 bus-ID: 0c:00.3 chip-ID: 1022:1457 class-ID: 0403
  Device-3: Tenx USB AUDIO type: USB driver: hid-generic,snd-usb-audio,usbhid bus-ID: 3-2:2
    chip-ID: 1130:1620 class-ID: 0300
  Sound Server-1: ALSA v: k5.15.0-101-generic running: yes
  Sound Server-2: JACK v: 1.9.20 running: no
  Sound Server-3: PulseAudio v: 15.99.1 running: yes
  Sound Server-4: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel pcie: speed: 2.5 GT/s
    lanes: 1 port: e000 bus-ID: 06:00.0 chip-ID: 8086:1539 class-ID: 0200
  IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 10.01 TiB used: 5.16 TiB (51.6%)
  ID-1: /dev/sda vendor: Crucial model: CT1000MX500SSD1 size: 931.51 GiB speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 032 scheme: GPT
  ID-2: /dev/sdb vendor: Crucial model: CT2000MX500SSD1 size: 1.82 TiB speed: 6.0 Gb/s type: SSD
    serial: <filter> rev: 033
  ID-3: /dev/sdc vendor: Western Digital model: WD40EZRZ-00GXCB0 size: 3.64 TiB speed: 6.0 Gb/s
    type: HDD rpm: 5400 serial: <filter> rev: 0A80
  ID-4: /dev/sdd vendor: Western Digital model: WD40EZAZ-00SF3B0 size: 3.64 TiB speed: 6.0 Gb/s
    type: HDD rpm: 5400 serial: <filter> rev: 0A80
Partition:
  ID-1: / size: 915.32 GiB used: 323.76 GiB (35.4%) fs: ext4 dev: /dev/sda3
  ID-2: /boot/efi size: 512 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/sda2
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
  Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 14 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: Super-speed hub ports: 8 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-3: 3-0:1 info: Hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 3-2:2 info: Tenx USB AUDIO type: Audio,HID driver: hid-generic,snd-usb-audio,usbhid
    interfaces: 3 rev: 1.1 speed: 12 Mb/s power: 500mA chip-ID: 1130:1620 class-ID: 0300
  Hub-4: 4-0:1 info: Super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-5: 5-0:1 info: Hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 5-3:3 info: Logitech M-BT85 [UltraX Optical Mouse] type: Mouse
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 1.5 Mb/s power: 98mA chip-ID: 046d:c03f
    class-ID: 0301
  Device-2: 5-4:4 info: China Resource Semico Keyboard type: Keyboard,HID
    driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s power: 98mA chip-ID: 1a2c:2124
    class-ID: 0300
  Hub-6: 6-0:1 info: Super-speed hub ports: 4 rev: 3.0 speed: 5 Gb/s chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 56.4 C mobo: N/A gpu: amdgpu temp: 31.0 C mem: 30.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 3
Repos:
  Packages: 3221 apt: 3152 flatpak: 69
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb https: //ftp-stud.hs-esslingen.de/pub/Mirrors/packages.linuxmint.com virginia main upstream import backport
    2: deb http: //ftp-stud.hs-esslingen.de/ubuntu jammy main restricted universe multiverse
    3: deb http: //ftp-stud.hs-esslingen.de/ubuntu jammy-updates main restricted universe multiverse
    4: deb http: //ftp-stud.hs-esslingen.de/ubuntu jammy-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Info:
  Processes: 373 Uptime: 17m wakeups: 0 Memory: 31.26 GiB used: 2.77 GiB (8.9%) Init: systemd
  v: 249 runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12 Client: Unknown python3.10 client
  inxi: 3.3.13
Top
Post Reply

Return to “Deutsch - German”