Connection drop after installing bandwitdhd

Questions about Wi-Fi and other network devices, file sharing, firewalls, connection sharing etc
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
zurricanjeep

Connection drop after installing bandwitdhd

Post by zurricanjeep »

Hi everyone,
I'm new to linux (and I'm french forgive my english :D )

I recently tried to install bandwithd which worked find. Then my wireless connection dropped and I wasn't able to reconnect. So I removed bandwithd and that fixed it.
I looked a bit to find an answer, because I would like to used that soft, but did not find any that match my problem. This also happened once when I tried using wireshark and I put my card on "sniffing" mode.

Here is the mintWIfi thing to help :

-------------------------
* I. scanning WIFI PCI devices...
-- Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
==> PCI ID = 168c:0032 (rev 01)
-------------------------
* II. querying ndiswrapper...
-------------------------
* III. querying iwconfig...
eth0 no wireless extensions.

wlan0 IEEE 802.11bgn ESSID:"Mozzarella"
Mode:Managed Frequency:2.462 GHz Access Point: 54:64:D9:3D:B8:36
Bit Rate=65 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=42/70 Signal level=-68 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:102 Missed beacon:0

lo no wireless extensions.

-------------------------
* IV. querying ifconfig...
eth0 Link encap:Ethernet HWaddr 78:45:c4:be:46:1d
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1416 errors:0 dropped:0 overruns:0 frame:0
TX packets:1416 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:142018 (142.0 KB) TX bytes:142018 (142.0 KB)

wlan0 Link encap:Ethernet HWaddr a4:17:31:93:c8:0b
inet addr:192.168.1.21 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a617:31ff:fe93:c80b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:112155 errors:0 dropped:0 overruns:0 frame:0
TX packets:75693 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:149565069 (149.5 MB) TX bytes:7967710 (7.9 MB)

-------------------------
* V. querying DHCP...
RTNETLINK answers: File exists
-------------------------
* VI. querying nslookup google.com...
Server: 192.168.1.1
Address: 192.168.1.1#53

Non-authoritative answer:
Name: google.com
Address: 173.194.45.78
Name: google.com
Address: 173.194.45.70
Name: google.com
Address: 173.194.45.71
Name: google.com
Address: 173.194.45.64
Name: google.com
Address: 173.194.45.67
Name: google.com
Address: 173.194.45.68
Name: google.com
Address: 173.194.45.69
Name: google.com
Address: 173.194.45.65
Name: google.com
Address: 173.194.45.73
Name: google.com
Address: 173.194.45.66
Name: google.com
Address: 173.194.45.72


Thank you all for your help :D
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
Locked

Return to “Networking”