Got this new laptop yesterday. Swapped out the HDD for an SSD and installed Mint 17 KDE.
Had issue with screen freezing so updated kernel to 3.19, seems to have fixed that but WIFI never has worked.
Here are the outputs from various commands and files:
uname -r
3.19.0-26-generic
inxi-Fxz
Code: Select all
System: Host: rick-Satellite-S55-C Kernel: 3.16.0-38-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: KDE 4.14.2 (Qt 4.8.6) Distro: Linux Mint 17.2 Rafaela
Machine: System: TOSHIBA product: Satellite S55-C version: PSPTNU-00E00M
Mobo: FF50 model: 06F2 version: Type2 - Board Version Bios: INSYDE version: 5.00 date: 07/16/2015
CPU: Dual core Intel Core i7-5500U CPU (-HT-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9577.92
Clock Speeds: 1: 2400.656 MHz 2: 2400.937 MHz 3: 2402.625 MHz 4: 1172.062 MHz
Graphics: Card: Intel Broadwell-U Integrated Graphics bus-ID: 00:02.0
X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
GLX Renderer: Mesa DRI Intel Broadwell GLX Version: 3.0 Mesa 10.1.0 Direct Rendering: Yes
Audio: Card-1: Intel Wildcat Point-LP High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Card-2: Intel Broadwell-U Audio Controller driver: snd_hda_intel bus-ID: 00:03.0
Sound: Advanced Linux Sound Architecture ver: k3.16.0-38-generic
Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 ver: 2.3LK-NAPI port: 3000 bus-ID: 08:00.0
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Card-2: Intel Wireless 7265 bus-ID: 07:00.0
IF: N/A state: N/A mac: N/A
Drives: HDD Total Size: 128.0GB (5.3% used) 1: id: /dev/sda model: Corsair_Force_GS size: 128.0GB
Partition: ID: / size: 106G used: 6.4G (7%) fs: ext4
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 54.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 205 Uptime: 4 min Memory: 872.1/11931.0MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11) inxi: 1.9.17
Code: Select all
-------------------------
* I. scanning WIFI PCI devices...
-- Intel Corporation Wireless 7265 (rev 61)
==> PCI ID = 8086:095a (rev 61)
-------------------------
* II. querying ndiswrapper...
-------------------------
* III. querying iwconfig...
eth0 no wireless extensions.
lo no wireless extensions.
-------------------------
* IV. querying ifconfig...
eth0 Link encap:Ethernet HWaddr 2c:60:0c:b4:3d:e3
inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::2e60:cff:feb4:3de3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4064 errors:0 dropped:0 overruns:0 frame:0
TX packets:2754 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3725288 (3.7 MB) TX bytes:467179 (467.1 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:710 errors:0 dropped:0 overruns:0 frame:0
TX packets:710 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:70789 (70.7 KB) TX bytes:70789 (70.7 KB)
-------------------------
* V. querying DHCP...
RTNETLINK answers: File exists
-------------------------
* VI. querying nslookup google.com...
Server: 192.168.1.1
Address: 192.168.1.1#53
Code: Select all
swcrypto:using crypto in software (default 0 [hardware]) (int)
11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
amsdu_size_8K:enable 8K amsdu size (default 0) (int)
fw_restart:restart firmware in case of error (default true) (bool)
antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
nvm_file:NVM file name (charp)
uapsd_disable:disable U-APSD functionality (default: Y) (bool)
bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
power_save:enable WiFi power management (default: disable) (bool)
power_level:default power save level (range from 1 - 5, default: 1) (int)
fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
Code: Select all
# /etc/modprobe.d/iwlwifi.conf
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
options iwlwifi 11n_disable=8
Thanks.
Rick.