Complete newb/moron here; can somebody bread-crumb me through installing the appropriate driver for this particular wireless chip for the dongle I just bought? I'm running Mint 17.1 and have kernel 3.13.0-24-generic; when I run dmesg, this is what I get:
Code: Select all
[ 2.353576] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.353771] ata1.00: configured for UDMA/133
[ 2.354010] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD U100 10.5 PQ: 0 ANSI: 5
[ 2.354203] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.354210] sd 0:0:0:0: [sda] 46905264 512-byte logical blocks: (24.0 GB/22.3 GiB)
[ 2.354353] sd 0:0:0:0: [sda] Write Protect is off
[ 2.354355] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.354474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.357244] sda: sda1 sda2
[ 2.357804] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.358682] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.358683] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.358685] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.365105] ata2.00: failed to enable AA (error_mask=0x1)
[ 2.365110] ata2.00: ATA-8: ST750LM022 HN-M750MBB, 2AR10001, max UDMA/100
[ 2.365114] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.368713] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.368717] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.368986] hub 1-1:1.0: USB hub found
[ 2.369087] hub 1-1:1.0: 6 ports detected
[ 2.371465] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.371469] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.371473] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.377824] ata2.00: failed to enable AA (error_mask=0x1)
[ 2.377833] ata2.00: configured for UDMA/100
[ 2.378028] scsi 1:0:0:0: Direct-Access ATA ST750LM022 HN-M7 2AR1 PQ: 0 ANSI: 5
[ 2.378175] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.378190] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.378191] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.378261] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.378263] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.378312] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.428575] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 2.429460] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.484362] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.617054] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.617055] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.617394] hub 2-1:1.0: USB hub found
[ 2.617558] hub 2-1:1.0: 8 ports detected
[ 2.784631] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 2.818888] usb 3-2: New USB device found, idVendor=0a12, idProduct=0001
[ 2.818890] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.818891] usb 3-2: Product: CSR8510 A10
[ 2.844545] tsc: Refined TSC clocksource calibration: 1696.147 MHz
[ 2.968707] Console: switching to colour frame buffer device 170x48
[ 2.971267] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.971269] i915 0000:00:02.0: registered panic notifier
[ 2.971496] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.973209] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.978261] acpi device:44: registered as cooling_device4
[ 2.978307] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:42/LNXVIDEO:00/input/input12
[ 2.979244] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.984687] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[ 2.984900] acpi device:51: registered as cooling_device5
[ 2.984993] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 2.985073] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.009779] usb 3-3: New USB device found, idVendor=5986, idProduct=0295
[ 3.009791] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.009795] usb 3-3: Product: Lenovo EasyCamera
[ 3.009798] usb 3-3: Manufacturer: Vimicro corp.
[ 3.080763] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 3.174174] usb 1-1.2: New USB device found, idVendor=13fe, idProduct=5200
[ 3.174178] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.174180] usb 1-1.2: Product: Patriot Memory
[ 3.174181] usb 1-1.2: Manufacturer:
[ 3.174183] usb 1-1.2: SerialNumber: 07013AE375B2DE53
[ 3.177250] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 3.177318] scsi6 : usb-storage 1-1.2:1.0
[ 3.177369] usbcore: registered new interface driver usb-storage
[ 3.189738] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x123c00, board id: 1800, fw id: 1087391
[ 3.235225] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 3.418019] random: nonblocking pool is initialized
[ 3.545882] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.829322] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.845058] Switched to clocksource tsc
[ 4.062397] Adding 1952764k swap on /dev/sda2. Priority:-1 extents:1 across:1952764k SSFS
[ 4.104623] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.151725] systemd-udevd[392]: starting version 204
[ 4.178429] scsi 6:0:0:0: Direct-Access Patriot Memory PMAP PQ: 0 ANSI: 6
[ 4.178659] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4.179266] sd 6:0:0:0: [sdc] 120933888 512-byte logical blocks: (61.9 GB/57.6 GiB)
[ 4.179884] sd 6:0:0:0: [sdc] Write Protect is off
[ 4.179889] sd 6:0:0:0: [sdc] Mode Sense: 2b 00 00 08
[ 4.180507] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.196961] lp: driver loaded but no devices found
[ 4.220116] cfg80211: Calling CRDA to update world regulatory domain
[ 4.242683] input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input14
[ 4.266032] usbcore: registered new interface driver rtl8192cu
[ 4.279860] wmi: Mapper loaded
[ 4.284309] ppdev: user-space parallel port driver
[ 4.285443] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 4.292092] Bluetooth: Core ver 2.17
[ 4.292109] NET: Registered protocol family 31
[ 4.292111] Bluetooth: HCI device and connection manager initialized
[ 4.292119] Bluetooth: HCI socket layer initialized
[ 4.292122] Bluetooth: L2CAP socket layer initialized
[ 4.292127] Bluetooth: SCO socket layer initialized
[ 4.294337] sdc: sdc1
[ 4.297723] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 4.304483] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 4.304493] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.304497] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.304500] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[ 4.304503] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.304504] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 4.304506] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[ 4.304509] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.304510] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.313396] usbcore: registered new interface driver btusb
[ 4.316877] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.316881] Copyright(c) 2003-2013 Intel Corporation
[ 4.317058] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.317219] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X
[ 4.373816] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 4.386512] Linux video capture interface: v2.00
[ 4.386999] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.387002] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 4.387003] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 4.387006] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 2200 BGN, REV=0x104
[ 4.387105] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 4.399853] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.424167] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.426692] hda_codec: CX20590: BIOS auto-probing.
[ 4.427165] autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 4.427167] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.427169] hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 4.427169] mono: mono_out=0x0
[ 4.427170] inputs:
[ 4.427172] Internal Mic=0x23
[ 4.427174] Mic=0x1a
[ 4.428175] hda_codec: Enable sync_write for stable communication
[ 4.440131] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.440271] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.440347] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.455116] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
[ 4.455836] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input18
[ 4.455913] usbcore: registered new interface driver uvcvideo
[ 4.455916] USB Video Class driver (1.1.1)
[ 4.461377] device-mapper: multipath: version 1.6.0 loaded
[ 4.471615] wl: module license 'MIXED/Proprietary' taints kernel.
[ 4.471619] Disabling lock debugging due to kernel taint
[ 4.474042] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 4.590303] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.593193] intel_rapl: domain uncore energy ctr 17477:17477 not working, skip
[ 4.636942] cfg80211: World regulatory domain updated:
[ 4.636946] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.636949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.636951] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.636954] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.636956] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.636958] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.799105] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.528138] init: failsafe main process (782) killed by TERM signal
[ 6.707754] init: patchram main process (853) terminated with status 5
[ 6.755363] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.755367] Bluetooth: BNEP filters: protocol multicast
[ 6.755376] Bluetooth: BNEP socket layer initialized
[ 6.761864] Bluetooth: RFCOMM TTY layer initialized
[ 6.761874] Bluetooth: RFCOMM socket layer initialized
[ 6.761880] Bluetooth: RFCOMM ver 1.11
[ 6.858708] init: samba-ad-dc main process (869) terminated with status 1
[ 7.145497] r8169 0000:03:00.0 eth0: link down
[ 7.145533] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.145823] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.147678] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 7.155263] iwlwifi 0000:04:00.0: Radio type=0x2-0x0-0x0
[ 7.399165] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 7.407788] iwlwifi 0000:04:00.0: Radio type=0x2-0x0-0x0
[ 7.480225] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.480542] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.500458] init: plymouth-upstart-bridge main process ended, respawning
[ 7.842242] init: plymouth-stop pre-start process (1519) terminated with status 1
[ 7.858617] bbswitch: version 0.7
[ 7.858627] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 7.858633] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 7.858645] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 7.858765] bbswitch: detected an Optimus _DSM function
[ 7.858776] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 7.858841] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 7.861407] bbswitch: disabling discrete graphics
[ 7.861418] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 8.463119] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 8.468119] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 8.470552] wlan0: authenticated
[ 8.471154] wlan0: associate with a4:2b:8c:8b:97:74 (try 1/3)
[ 8.485054] wlan0: RX AssocResp from a4:2b:8c:8b:97:74 (capab=0x411 status=0 aid=2)
[ 8.504516] wlan0: associated
[ 8.504550] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 8.504610] cfg80211: Calling CRDA for country: US
[ 8.507235] cfg80211: Regulatory domain changed to country: US
[ 8.507239] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.507241] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.507244] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.507246] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.507248] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.507250] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.507252] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.507253] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 8.699244] wlan0: deauthenticating from a4:2b:8c:8b:97:74 by local choice (reason=2)
[ 8.725830] cfg80211: Calling CRDA to update world regulatory domain
[ 8.726150] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 8.729886] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 8.730027] cfg80211: World regulatory domain updated:
[ 8.730031] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.730033] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.730036] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.730038] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.730040] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.730041] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.732349] wlan0: authenticated
[ 8.735228] wlan0: associate with a4:2b:8c:8b:97:74 (try 1/3)
[ 8.739397] wlan0: RX AssocResp from a4:2b:8c:8b:97:74 (capab=0x411 status=0 aid=2)
[ 8.762403] wlan0: associated
[ 8.762464] cfg80211: Calling CRDA for country: US
[ 8.765053] cfg80211: Regulatory domain changed to country: US
[ 8.765057] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.765059] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 8.765062] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 8.765064] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.765066] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.765068] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.765071] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 8.765073] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 17.260774] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[ 17.266832] init: nvidia-prime main process (1145) terminated with status 1
[ 17.869479] init: Failed to spawn nvidia-persistenced main process: unable to execute: No such file or directory
[ 27.349591] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 101.942195] cfg80211: Calling CRDA to update world regulatory domain
[ 101.949889] cfg80211: World regulatory domain updated:
[ 101.949898] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 101.949903] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 101.949908] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 101.949912] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 101.949916] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 101.949919] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 102.509639] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 102.515063] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 102.538703] wlan0: send auth to a4:2b:8c:8b:97:74 (try 2/3)
[ 102.563242] wlan0: send auth to a4:2b:8c:8b:97:74 (try 3/3)
[ 102.583277] wlan0: authentication with a4:2b:8c:8b:97:74 timed out
[ 109.057660] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 109.061302] wlan0: direct probe to a4:2b:8c:8b:97:74 (try 1/3)
[ 109.265117] wlan0: direct probe to a4:2b:8c:8b:97:74 (try 2/3)
[ 109.469253] wlan0: send auth to a4:2b:8c:8b:97:74 (try 3/3)
[ 109.512817] wlan0: authenticated
[ 109.513310] wlan0: associate with a4:2b:8c:8b:97:74 (try 1/3)
[ 109.537974] wlan0: RX AssocResp from a4:2b:8c:8b:97:74 (capab=0x411 status=0 aid=2)
[ 109.588984] wlan0: associated
[ 109.589192] cfg80211: Calling CRDA for country: US
[ 109.597593] cfg80211: Regulatory domain changed to country: US
[ 109.597597] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 109.597598] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 109.597600] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 109.597601] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.597602] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.597603] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 109.597604] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 109.597606] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 132.960288] cfg80211: Calling CRDA to update world regulatory domain
[ 132.968085] cfg80211: World regulatory domain updated:
[ 132.968090] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 132.968091] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 132.968093] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 132.968094] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 132.968096] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 132.968097] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 133.529167] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 133.534313] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 133.554500] wlan0: send auth to a4:2b:8c:8b:97:74 (try 2/3)
[ 133.577196] wlan0: send auth to a4:2b:8c:8b:97:74 (try 3/3)
[ 133.598841] wlan0: authentication with a4:2b:8c:8b:97:74 timed out
[ 134.577965] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 134.580466] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 134.601587] wlan0: send auth to a4:2b:8c:8b:97:74 (try 2/3)
[ 134.622116] wlan0: send auth to a4:2b:8c:8b:97:74 (try 3/3)
[ 134.641571] wlan0: authentication with a4:2b:8c:8b:97:74 timed out
[ 136.123495] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 136.126771] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 136.129411] wlan0: authenticated
[ 136.133479] wlan0: associate with a4:2b:8c:8b:97:74 (try 1/3)
[ 136.137812] wlan0: RX AssocResp from a4:2b:8c:8b:97:74 (capab=0x411 status=0 aid=2)
[ 136.157766] wlan0: associated
[ 136.157926] cfg80211: Calling CRDA for country: US
[ 136.165669] cfg80211: Regulatory domain changed to country: US
[ 136.165678] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 136.165684] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 136.165688] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 136.165692] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.165696] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.165700] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.165704] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 136.165707] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 277.070875] cfg80211: Calling CRDA to update world regulatory domain
[ 277.079207] cfg80211: World regulatory domain updated:
[ 277.079216] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 277.079221] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.079226] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.079230] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 277.079234] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.079238] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.635550] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 277.640691] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 277.672019] wlan0: authenticated
[ 277.674857] wlan0: associate with a4:2b:8c:8b:97:74 (try 1/3)
[ 277.679150] wlan0: RX AssocResp from a4:2b:8c:8b:97:74 (capab=0x411 status=0 aid=2)
[ 277.699974] wlan0: associated
[ 277.700178] cfg80211: Calling CRDA for country: US
[ 277.708313] cfg80211: Regulatory domain changed to country: US
[ 277.708318] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 277.708320] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 277.708322] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 277.708324] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.708326] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.708328] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 277.708330] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 277.708331] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 566.460229] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[ 566.476625] usb 3-1: New USB device found, idVendor=050d, idProduct=1109
[ 566.476636] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 566.476642] usb 3-1: Product: 802.11n NIC
[ 566.476646] usb 3-1: Manufacturer: Realtek
[ 566.476651] usb 3-1: SerialNumber: 123456
[ 570.518598] usb 3-1: USB disconnect, device number 4
[ 574.279952] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
[ 574.372827] usb 1-1.1: New USB device found, idVendor=050d, idProduct=1109
[ 574.372839] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 574.372844] usb 1-1.1: Product: 802.11n NIC
[ 574.372849] usb 1-1.1: Manufacturer: Realtek
[ 574.372853] usb 1-1.1: SerialNumber: 123456
[ 793.273137] cfg80211: Calling CRDA to update world regulatory domain
[ 793.280589] cfg80211: World regulatory domain updated:
[ 793.280598] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 793.280604] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.280609] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.280612] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 793.280616] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.280620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.840133] wlan0: authenticate with a4:2b:8c:8b:97:74
[ 793.845306] wlan0: send auth to a4:2b:8c:8b:97:74 (try 1/3)
[ 793.847746] wlan0: authenticated
[ 793.848985] wlan0: associate with a4:2b:8c:8b:97:74 (try 1/3)
[ 793.853254] wlan0: RX AssocResp from a4:2b:8c:8b:97:74 (capab=0x411 status=0 aid=2)
[ 793.872864] wlan0: associated
[ 793.872958] cfg80211: Calling CRDA for country: US
[ 793.875891] cfg80211: Regulatory domain changed to country: US
[ 793.875896] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 793.875898] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 793.875901] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 793.875903] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.875904] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.875906] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 793.875908] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 793.875910] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 803.047748] usb 1-1.1: USB disconnect, device number 4
[ 1103.159918] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[ 1103.252712] usb 1-1.1: New USB device found, idVendor=050d, idProduct=1109
[ 1103.252723] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1103.252729] usb 1-1.1: Product: 802.11n NIC
[ 1103.252733] usb 1-1.1: Manufacturer: Realtek
[ 1103.252737] usb 1-1.1: SerialNumber: 123456
[ 1105.273478] usb 3-2: USB disconnect, device number 2
[ 1105.521219] usb 1-1.2: USB disconnect, device number 3
[ 1108.594604] usb 1-1.1: USB disconnect, device number 5
[ 1113.080499] usb 3-2: new high-speed USB device number 5 using xhci_hcd
[ 1113.096901] usb 3-2: New USB device found, idVendor=050d, idProduct=1109
[ 1113.096912] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1113.096918] usb 3-2: Product: 802.11n NIC
[ 1113.096923] usb 3-2: Manufacturer: Realtek
[ 1113.096927] usb 3-2: SerialNumber: 123456
Thanks in advance!
-Jonathan