Mint 17.1 , Wifi not connecting from both adapters

Questions about Wi-Fi and other network devices, file sharing, firewalls, connection sharing etc
Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.
Locked
sidser

Mint 17.1 , Wifi not connecting from both adapters

Post by sidser »

In Windows everything works fine using:
Ralink 3070 USB antenna
Enclosed Atheros AR5BWB222 Wireless Network Adapter

Linux Mint 17.1 downloaded .... did bootable USB flash drive .. Launched in Mint that would climb was happy as an elephant ... and then think well, time to set up to Wifi internet think forbid subkey WIFI And here came problem.

All network sees as usual .... But , do not connect to a single built-in maps also do not want to connect to nothing .... loaded moment and then says that disconnected... and all ... what could be the problem. .. Becouse i am seaman and on vessel we have router no cable... thats why i cannot risk if i wil install mint and wifi wil not work i will stay on emty mint withou internet... what to do ?
Most interesting both of wifi adapters have similar problem
Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 2 times in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.
sidser

Re: Mint 17.1 LiveCd , Wifi problem

Post by sidser »

I tryied to install Mint ... i make it all was done... i can use it now , but still problem same.. my wifi see all hotspots but i can not connect to them... Someone can help ?
sidser

Re: Mint 17.1 LiveCd , Wifi problem

Post by sidser »

sidser@sidser-home ~ $ mintwifi

Code: Select all

-------------------------
* I. scanning WIFI PCI devices...
  -- Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
      ==> PCI ID = 168c:0034 (rev 01)
-------------------------
* II. querying ndiswrapper...
-------------------------
* III. querying iwconfig...
wlan1     IEEE 802.11abgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=16 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          
eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          
-------------------------
* IV. querying ifconfig...
eth0      Link encap:Ethernet  HWaddr 4c:72:b9:ad:90:db  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:190 errors:0 dropped:0 overruns:0 frame:0
          TX packets:190 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:15630 (15.6 KB)  TX bytes:15630 (15.6 KB)

wlan0     Link encap:Ethernet  HWaddr 00:25:22:4d:b8:f2  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan1     Link encap:Ethernet  HWaddr 20:68:9d:25:98:e9  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

-------------------------
* V. querying DHCP...
[sudo] password for sidser: 
-------------------------
* VI. querying nslookup google.com...
;; connection timed out; no servers could be reached
sidser@sidser-home ~ $ inxi -Fxz

Code: Select all

System:    Host: sidser-home Kernel: 3.13.0-37-generic x86_64 (64 bit, gcc: 4.8.2) 
           Desktop: Gnome Distro: Linux Mint 17.1 Rebecca
Machine:   System: Acer (portable) product: Aspire V3-771 version: V1.10
           Mobo: Type2 - Board Vendor Name1 model: VA70_HC version: Type2 - Board Version
           Bios: Insyde version: V1.10 date: 07/23/2012
CPU:       Quad core Intel Core i7-3630QM CPU (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19156.5 
           Clock Speeds: 1: 1200.00 MHz 2: 1200.00 MHz 3: 1200.00 MHz 4: 1200.00 MHz 5: 1200.00 MHz 6: 1200.00 MHz 7: 1200.00 MHz 8: 1200.00 MHz
Graphics:  Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0 
           Card-2: NVIDIA GK107M [GeForce GT 650M] bus-ID: 01:00.0 
           X.Org: 1.15.1 drivers: (unloaded: fbdev,vesa) FAILED: nouveau,intel Resolution: 1600x900@60.1hz 
           GLX Renderer: Mesa DRI Intel Ivybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio:     Card: Intel 7 Series/C210 Series Chipset Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture ver: k3.13.0-37-generic
Network:   Card-1: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet driver: atl1c ver: 1.0.1.1-NAPI port: 2000 bus-ID: 0e:00.0
           IF: eth0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9462 Wireless Network Adapter driver: ath9k bus-ID: 0d:00.0
           IF: wlan1 state: down mac: <filter>
           Card-3: Ralink RT2870/RT3070 Wireless Adapter driver: rt2800usb ver: 2.3.0 usb-ID: 148f:3070
           IF: wlan0 state: down mac: <filter>
Drives:    HDD Total Size: 750.2GB (32.2% used) 1: id: /dev/sda model: TOSHIBA_MQ01ABD0 size: 750.2GB temp: 39C 
Partition: ID: / size: 38G used: 970M (3%) fs: ext4 ID: /home size: 349G used: 86M (1%) fs: ext4 
           ID: /usr size: 46G used: 3.5G (8%) fs: ext4 ID: swap-1 size: 16.00GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 48.0C mobo: N/A gpu: 37.0 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 201 Uptime: 9 min Memory: 465.5/7825.5MB Runlevel: 2 Gcc sys: 4.8.2 Client: Shell inxi: 1.8.4 
sidser

Re: Mint 17.1 LiveCd , Wifi problem

Post by sidser »

make update or something else i cannot becouse i have on board have only Wi-Fi and i dont have permission for cable
Locked

Return to “Networking”