What happended:
During installation of Mint 16 the wireless connection seemed not to be a problem. My network was found and i got the connection.
But after reboot, the connection to WLAN does't work
I use a SAMSUNG NC10 netbook. with an Atheros wireless card
I think i have some problems with my wrapper, but i'm not sure and i have no idea, how to fix the problem
Some information from mintwifi:
No results for scanning wifi pci devices nor querying ndiswrapperwlan0 IEEE 802.11bg ESSID:"hansi"
Mode:Managed Frequency:2.437 GHz Access Point: 00:19:5B:BF:8C:FB
...
Power Management:off
Link Quality=46/70 Signal level=-64 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth0
Link encap:Ethernet HWaddr 00:13:77:f8:c6:1f
...
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:360 errors:0 dropped:0
overruns:0 frame:0
...
wlan0 L
ink encap:Ethernet HWaddr 00:24:2c:6b:43:94
inet6 addr: fe80::224:2cff:fe6b:4394/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:522 errors:0 dropped:0 overruns:0 frame:0
TX packets:680 errors:0 dropped:0 overruns:0 carrier:0
...
wlan0:avahi Link encap:Ethernet
HWaddr 00:24:2c:6b:43:94
inet addr:169.254.6.174 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500
Metric:1
;; connection timed out;
no servers could be reached
Result from lspci
Code: Select all
Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)03:00.0
Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 13)