Edit: I can get around the printscreen issue by manually running mate-screenshot from terminal. Still don't know why hitting the printscreen button doesn't work.
Code: Select all
System: Kernel: 3.16.0-39-generic x86_64 (64 bit, gcc: 4.8.2)
Desktop: Cinnamon 2.6.13 Distro: Linux Mint 17.2 Rafaela
Machine: Mobo: ASUSTeK model: U56E version: 1.0 Bios: American Megatrends version: U56E.208 date: 07/26/2011
CPU: Dual core Intel Core i5-2430M CPU (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9578.8
Clock Speeds: 1: 985.031 MHz 2: 801.281 MHz 3: 799.968 MHz 4: 813.937 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0
X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 10.1.3 Direct Rendering: Yes
Audio: Card: Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture ver: k3.16.0-39-generic
Network: Card-1: Intel Centrino Wireless-N + WiMAX 6150 driver: iwlwifi ver: in-tree: bus-ID: 02:00.0
IF: wlan0 state: up mac: 40:25:c2:73:7f:94
Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet driver: atl1c ver: 1.0.1.1-NAPI port: a000 bus-ID: 04:00.0
IF: eth0 state: down mac: 54:04:a6:1a:ce:01
Drives: HDD Total Size: 640.1GB (17.8% used) 1: id: /dev/sda model: Hitachi_HTS54756 size: 640.1GB
Partition: ID: / size: 224G used: 106G (50%) fs: ext4 ID: swap-1 size: 6.34GB used: 0.00GB (0%) fs: swap
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 201 Uptime: 11 min Memory: 852.5/5872.7MB Runlevel: 2 Gcc sys: 4.8.4
Client: Shell (bash 4.3.11) inxi: 1.9.17
mrdachshund86