Compiz 3d windows doesn't render correctly

[minttux]

Hi i have problem with compiz 3d windows rendering it shows:


my system info:


my vga is intel
and i run this command on mate desktop:

Code: Select all

LIBGL_ALWAYS_INDIRECT=1 INTEL_BATCH=1 compiz --replace --indirect-rendering --sm-disable ccp

it's my vga output:

Code: Select all

$ sudo lshw -c video
  *-display               
       description: VGA compatible controller
       product: 3rd Gen Core processor Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:47 memory:a0000000-a03fffff memory:90000000-9fffffff ioport:2000(size=64)

Code: Select all

$ sudo lspci -nnk | grep -A5 VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
	Subsystem: Apple Inc. Device [106b:00ff]
	Kernel driver in use: i915

Code: Select all

$ xrandr
Screen 0: minimum 320 x 200, current 1600 x 900, maximum 32767 x 32767
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1600x900+0+0 (normal left inverted right x axis y axis) 443mm x 249mm
   1600x900       60.0*+
   1440x900       75.0     59.9  
   1280x800       59.9  
   1152x864       75.0  
   1280x720       60.0     50.0     59.9  
   1024x768       75.1     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   720x576        50.0  
   720x480        60.0     59.9  
   640x480        75.0     72.8     66.7     60.0     59.9  
   720x400        70.1  
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

Code: Select all

$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)

is there any special driver should i install?

[exploder]

No, the Intel driver is open source.

[Monsta]

System info is from Cinnamon... are you trying to run Compiz with Cinnamon?

[minttux]

System info is from Cinnamon... are you trying to run Compiz with Cinnamon?

Now this screenshot has taken before

[smok3]

In the settings of the 3d Cube set the windows space to 0, i had the same glitch

[phsilver]

Hi.. Same to me... Just render the window without the cube as background...
In fact, not all the effects in Compiz are available, sucha as Beam Up animation effect... Is missing...
Regards.